JET-M
The Winterwarm JET-M is especially engineered for heating high areas
- Applicable in high areas with 5 to 15m height
- Sustainable heating solution
- Low investment costs
- Provided with Modbusrouter
- Reduces heat loss through the ceiling
Description
Sustainable heating of high areas a challenge? Not with the Winterwarm JET!
With the special nozzles this air heater distributes the warm air from above downwards to the floor. This way the JET prevents warm air from assembling underneath the ceiling. Energy is saved and comfort enhanced because the temperature difference between ceiling and floor remains limited
Connection with modbus
The Winterwarm JET-M is a model which as standard is provided with a modbus router. The JET-M can be controlled by a building management system or the Winterwarm Smart Controller.
In situations without destratification, the temperature typically increases by 1.3°C per meter of height. When installing a JET this temperature difference is only about 0.16°C per meter, thus limiting the heat loss through the roof. On top the inducing nozzles take care of an optimal distribution of the heat.
The Winterwarm JET can be connected to each heat pump, boiler of district heating system and is provided with a coil which is especially designed to realise as high as possible heat output at low water temperatures.
The heaters are provided with economical EC fan motors of which the speed can be adjusted continuously (0-10V) for more comfort.
There are no destratification fans needed anymore which reduces the electricity consumption.
Features
- Applicable in high areas with 5 to 15m height
- Comfortable heating solution
- Up to 30% energy savings
- Built-in Modbus router
- Control by means of a Building Management System or Smart Controller
- Conical nozzles with induction of air for more air recirculation
- Low sound level
- CO2 reduction as a result of lower energy consumption